Zanussi DE6744 Bedienungsanleitung PDF herunterladen (Seite 17)

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing

programmes" chart).

Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and

rinse aid respectively and using the test programme (see "Washing programmes" chart).

Hints for test centres

Arrangement lower basket

Arrangement upper basket

Arrangement cutlery basket

Load: 12 standard place settings

Rinse aid setting

Rinse aid dispenser (type A): position 4 (type III)

Rinse aid dispenser (type B): position 5 (type III)

Detergent dosage: 5g + 25g (type B)

Electrical connection

Information concerning the electrical connection is given on the

rating plate on the edge of the dishwasher’s door on the right.

Before plugging the appliance into the wall socket, make sure

that:

1. The mains voltage and current rating at the site of

installation match the nominal voltage and current rating

given on the rating plate.

2. The meter, fuses, mains power supply and wall socket can

all take the maximum load required. Make sure that the

socket and plug are compatible without having to use any

type of adaptor. If necessary, have the domestic wiring

system socket replaced.

To isolate the dishwasher from mains, remove the mains plug.

Important!

The plug must still be accessible after the appliance

has been installed.

In case that the electrical cable has to be replaced,

please contact your local consumer services

department.

Safety standards require the appliance to be

earthed.

The manufacture accepts no liability for failure to

observe the above safety precautions.

1 2 ... 12 13 14 15 16 17 18 19

Keine Kommentare

Zanussi DE6744 Bedienungsanleitung Seite 17