Zanussi DE6844 Bedienungsanleitung

GESCHIRRSPÜLERDISHWASHERDE 6844Bedienungsanleitung Instruction bookDGB

353. Press the 65° push button, the correspondent indicator light keeps flashing while the indicator light of the 70° 80Ipush button turns off.At the

36Loading your applianceBefore placing dishes in the machine, remove anyscraps of food, to avoid clogging the filters andconsequently reducing the per

US4737The cutlery basketLong bladed knives stored in an upright position are a potential hazard.Long and/or sharp items of cutlery such as carving kni

38In case that plates are loaded in theupper basket:load them starting from the rear positions of thebasket; tilting them slightly forwards and avoidi

39Use of detergent Only use detergents specifically designed for use in dishwashers.If using powder detergents proceed as follows: 1. Open the dispens

40To save energyPlace dishes in the machine immediately after everymeal and wait until the dishwasher is full beforewashing.Do not prewash dishes unde

Washing programmes41Type of loadDegree of soilHeavy soil.Crockery, cutlery, pots and pansNormal soil.Crockery and cutleryFresh soil.Crockery and cutle

421. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the On/Off push buttonThe On

43During the countdown the only indicator lights illuminated are the programme light and the light of the number of hours to the start of the program

44Internal cleaningEnsure that the seals around the door, the detergentand rinse aid dispensers are cleaned regularly witha damp cloth.We recommend ev

27For the userImportant safety information 28Description of the appliance 29The control panel 30Before use 31Setting the water softener 31Rinse aid 34

45Check that the WRD is not clogged with detergentresidue. If necessary rinse it under running waterafter having removed it from the basket by twistin

46Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling outan engineer. The dishwasher is f

47If after all these checks, the problem persists,contact your local Service Force Centre, quoting themodel and serial number. This information can be

48Hints for test centresBefore starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinseaid dispe

49Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.Any plumbing work requir

50The water supply hose is fitted with a safety device,which prevents water from entering the machineshould the inner hose split, due to wear.The prob

51Electrical connectionBefore plugging the appliance into the wall socket,make sure that:1. The mains voltage corresponds to the voltage given in the

152976 43/0From the Electrolux Group. The world’s No.1 choice.The Electrolux Group is the world’s largest producer of powered appliances for kitchen,c

28Installation● This appliance is heavy. Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this

291. Levelling spacers2. Upper basket stop3. Salt container4. Large filter5. Detergent dispenser6. Control panel7. Rating plate8. Rinse aid dispenser9

301. On/Off indicator light2. On/off push button3. Door handle4. Programme selection push buttons5. Half load push button This option is useful and ec

31Before using your dishwasher for thefirst time:1. Ensure that the electrical and water connections comply with the installation instructions2. Remov

32Press the 70° 80Ipush button, the indicator light of the 65° push button turns off, while the indicator light of the 70° 80Ipush button remains fixe

33Filling with saltOnly use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in a dishwashe

34Rinse aid Rinse aid is automatically added during the lastrinse, ensuring thorough rinsing, and spot andstreak free drying. The dispenser, which isp