Zanussi ZDF301 Bedienungsanleitung

User manualDishwasherZDF 204Downloaded from DishWasher-Manual.com Manuals

Unscrew the cap.Only before filling withsalt for the first time, fillthe salt container with wa-ter.Using the funnel provided,pour in the salt until t

Filling with rinse aidOpen the lid.Fill up with rinse aid. Themaximum level for filling isindicated by "max"Clean up any rinse aidwhich over

Open the lid.Set the dosage level. (Thedose is factory set in po-sition 4).Close the lid and press un-til it locks.Loading cutlery and dishesSponges,

For washing in the dishwasher the following cutlery and dishesare not suitable: are of limited suitability:• Cutlery with wooden, horn, china or mothe

Load upper basket. Lightitems (plastic bowls etc.)must be loaded in the up-per basket and arrangedso they do not move.For taller items, the cupracks c

Use of detergentIMPORTANT!Only use detergents suitable for dishwashers.Observe the manufacturer’s dosing and stor-age recommendations.Open the lid.Fil

• Water may appear on the sides and the doorof the dishwasher as the stainless steel willeventually become cooler than the dishes. CAUTION!When the w

Cleaning the spray armsNEVER try to remove the spray arms.If residues of soil have clogged the holes in thespray arms, remove them with a cocktail sti

CAUTION!When a unit is no longer being used:• Pull the plug out of the socket.• Cut off the cable and plug and dispose ofthem.• Dispose of the door

Fault code and malfunction Possible cause and solution•continuous flashing of the start/cancel indicatorlight•3 flashes of the end of programme indica

Thank you for selecting ourapplianceWe wish you lots of enjoyment with your newappliance and we hope that you will considerour brand again when purcha

The wash results are not satisfactoryThe dishes are not clean • The wrong washing programme has been selected.• The dishes are arranged in such a way

Noise level dB(A) 51Consumption valuesThe consumption values are intended as aguide and depends on the pressure and thetemperature of the water and al

Upper basketCutlery basket Lower basketcup racks: position AInstallation WARNING!Any electrical and/or plumbing work required toinstall this applianc

Inlet hoseConnect the inlet hose to a water tap with an externalthread of 3/4”.The inlet hose can be turned either to the left or theright to suit the

Electrical connection CAUTION!Safety standards require the appliance to beearthed.Prior to using the appliance for the first time,ensure that the rat

European GuaranteeThis appliance is guaranteed by Electrolux ineach of the countries listed at the back of thisuser manual, for the period specified i

Hellas +30 23 10 56 19 70 4, Limnou Str., 54627 ThessalonikiHrvatska +385 1 63 23 338 Slavonska avenija 3, 10000 ZagrebIreland +353 1 40 90 753 Long M

Україна +380 44 586 20 60 04074 Київ, вул.Автозаводська,2а, БЦ "Алкон" 27Downloaded from DishWasher-Manual.com Manuals

www.electrolux.com156990920-00-022008Downloaded from DishWasher-Manual.com Manuals

Safety informationIn the interest of your safety and to ensure thecorrect use, before installing and first using theappliance, read this user manual c

Installation• Check your dishwasher for any transportdamage. Never connect a damaged ma-chine. If your dishwasher is damaged con-tact your supplier.•

Programme selector dial and On/Off switch• when in this position, the machine is switched off(corresponding light off),• when the marker on the dial c

Indicator lightsSalt refillingIlluminates when special salt needs to be filled.It can remain illuminated several hours after the salthas been filled.W

Programme Half load Degree of soil Type of load Programme de-scriptionRinse and Hold No Any.Partial load (to be completed later in theday).1 cold rins

– Fill up the salt and rinse aid container.– Adjust the water hardness setting to thehighest level and perform 1 normal washingprogramme without loadi

Setting the water softener manually (see table)Set switch to position 1 or2The water softener is factory set at position 2.Setting the water softener