GETTING STARTED?EASY.User ManualZFT11112WVEN User ManualFreezer
Problem Possible cause SolutionThe temperature in the appli-ance is too low/too high.The temperature regulator isnot set correctly.Set a higher/lower
Some functional problems might occurfor some types of models whenoperating outside of that range. Thecorrect operation can only beguaranteed within th
216. Fit the appliance door on the upper door hingepin.7. Remove the lower hinge. Put over the pin in thedirection of the arrow.8. Unscrew and install
1. Connect the wire coloured green and yellow tothe terminal marked either with the letter “E“ orby the earth symbol or coloured green andyellow.2.
WWW.ZANUSSI.COM/SHOP212002008-A-512017
SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for
• Do not damage the refrigerant circuit.• Do not use electrical appliances inside the food storagecompartments of the appliance, unless they are of th
• Do not put electrical appliances (e.g. ice creammakers) in the appliance unless they are statedapplicable by the manufacturer.• Be careful not to ca
5Red Alarm Indicator LightSWITCHING ONLeave the appliance to stand upright for 4 hoursafter installation.1. Insert the plug into the wall socket.2. Tu
DAILY USEWARNING! Refer to Safety chapters.FREEZING FRESH FOODThe freezer compartment is suitable for freezingfresh food and storing frozen and deep-f
HINTS FOR STORAGE OF FROZEN FOODTo obtain the best performance from this appliance,you should:• make sure that the commercially frozenfoodstuffs were
WARNING! Do not touch frozengoods with wet hands. Hands canfreeze to the goods.3. Leave the door open and insert the plasticscraper in the appropriate
Problem Possible cause SolutionPower indicator light is flash-ing.An error has occurred in meas-uring the temperature.Contact a qualified electriciano
Kommentare zu diesen Handbüchern