Zanussi ZGF759ICN Bedienungsanleitung

GAS HOBMODEL ZGF 759INSTRUCTION BOOKLETIL

1050 50FO 2039FO 0199aCarry out the building in of the hob as follows:• put the seals supplied with the hob, onthe edges of the cut out: place themexa

11CommissioningWhen the hob has been fully installed it will benecessary to check the minimum flame setting.To do this, follow the procedure below.- T

12A: Removal Of Hob Top1. Remove all control knobs, pan supports, burnercaps and burner crowns.2. Remove 2 screws for each burner.3. Remove 6 fixing s

3Important Safety InformationYou MUST read these warnings carefully before installing orusing the appliance.Installation This appliance must be insta

4For the UserDescription of the Hob Page 4Operation Page 5Maintenance and Cleaning Page 5Something Not Working Page 7For the InstallerTechnical Data P

5OperationTo light a burner, turn the relevant control knobanticlockwise to maximum position and push itdown to ignite. Keep the control knob pressedd

6Before any maintenance or cleaningcan be carried out, you mustDISCONNECT the hob from theelectricity supply.The hob is best cleaned whilst it is stil

7OVERALL DIMENSIONSWidth: 680 mm.Depth: 510 mm.Height: 72 mm.Weight: 12 Kg.CUT OUT DIMENSIONSWidth: 560 mm.Depth: 480 mm.Thickness: 30 mm.Instructions

8Rectangular cut-out size for hob560150 min48055 min.FO 2038Dimensions are given in mm.InstallationCut Out SizeThe dimensions of the cut-out are given

9Building InBuilding over a cupboard or drawerIf the hob is to be installed above a cupboard ordrawer it will be necessary to fit a heat resistantboar