Zanussi ZOF35712XK Bedienungsanleitung PDF herunterladen (Seite 9)

To change the time of day press again and

again until starts to flash.

Setting the DURATION

1. Set an oven function and temperature.

2. Press again and again until starts to

flash.

3. Press or to set the DURATION time.

The display shows .

4. When the time ends, flashes and an

acoustic signal sounds. The appliance

deactivates automatically.

5. Press any button to stop the acoustic

signal.

6. Turn the knob for the oven functions and

the knob for the temperature to the off

position.

DURATION works only for the main

oven.

Setting the END

1. Set an oven function and temperature.

2. Press again and again until starts to

flash.

3. Press or to set the time.

The display shows .

4. When the time ends, flashes and an

acoustic signal sounds. The appliance

deactivates automatically.

5. Press any button to stop the signal.

6. Turn the knob for the oven functions and

the knob for the temperature to the off

position.

The function works only for the main

oven.

Setting the TIME DELAY

1. Set an oven function and temperature.

2. Press again and again until starts to

flash.

3. Press or to set the time for

DURATION.

4. Press .

5. Press or to set the time for END.

6. Press to confirm.

Appliance turns on automatically later on, works

for the set DURATION time and stops at the set

END time. At the set time an acoustic signal

sounds.

7. The appliance deactivates automatically.

Press any button to stop the signal.

8. Turn the knob for the oven functions and

the knob for the temperature to the off

position.

TIME DELAY works only for the main

oven.

Setting the MINUTE MINDER

1. Press again and again until starts to

flash.

2. Press or to set the necessary time.

The Minute Minder starts automatically after 5

seconds.

3. When the set time ends, an acoustic signal

sounds. Press any button to stop the

acoustic signal.

4. Turn the knob for the oven functions and

the knob for the temperature to the off

position.

Cancelling the clock functions

1. Press the again and again until the

necessary function indicator starts to flash.

2. Press and hold .

The clock function goes out after some

seconds.

Using the accessories

WARNING!

Refer to Safety chapters.

Inserting the accessories

Wire shelf:

Push the shelf between the guide bars of the

shelf support and make sure that the feet point

down.

www.zanussi.com 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare