Zanussi TE1025V Bedienungsanleitung PDF herunterladen (Seite 6)

3.7.2. Modifying the current programme

Before modifying the current programme, you must put the

washing machine to pause by pressing on the «Start/Pau-

se» pushbutton. If it is impossible to make the modification,

the corresponding light flashes for few seconds. If you de-

cide to change the programme in any case, you will need

to cancel the current programme (see below).

3.7.3. Cancelling the programme

If you want to cancel a programme, turn the programme

selector knob to the «off» position of the programme

selector.

You can then select a new programme after cancelling the

previous one.

3.8. End of program

The washing machine stops automatically. The «cycle

end» light goes on. The opening of the lid is only possible

2 minutes after the washing machine stops.

If you choose the rinse hold pushbutton, the rinse hold

light* illuminates to inform you that water has to be drained

before you can open the cover. To terminate the cycle, you

can then spin the washing by choosing the spinning

program or drain it by choosing the drain program.

Turn the program selector knob to the «Off» position.

Take out the washing.

Pull out the power supply plug and close the water supply

tap.

Note: we recommend that you should leave the cover and

the drum open after use to air the washing drum.

*according to the model

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Keine Kommentare

Zanussi TE1025V Bedienungsanleitung Seite 6