Zanussi ZWF12380W Bedienungsanleitung Seite 1

ENUser manualWashing MachineZWF 12380WZWF 14380W

Removing stainsStubborn stains may not be removed by just water anddetergent. It is therefore advisable to treat them prior towashing.Blood: treat fre

Washing programmesProgramme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum FabricsLoad - Type of LaundryOptions D

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum FabricsLoad - Type of LaundryOptions Detergent drawerSyn

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum FabricsLoad - Type of LaundryOptions Detergent drawerSpi

Programme - Maximum and Minimum Temperature - CycleDescription - Maximum Spin Speed - Maximum FabricsLoad - Type of LaundryOptions Detergent drawerSpo

Problem Possible cause/SolutionThe machine does not start:The door has not been closed. • Close the door firmly.The plug is not properly inserted in t

Problem Possible cause/SolutionThere is water on the floor:Too much detergent or unsuitable detergent (creates too much foam) hasbeen used.• Reduce th

Problem Possible cause/SolutionSpinning starts late or the machinedoes not spin:The electronic unbalance detection device has cut in because the laund

Consumption valuesProgramme Energy consumption(KWh)Water consumption (litres) Programme duration(Hours.Minutes)White Cottons 90° 2,2 65For the duratio

Replace the drawer and run the rinse programme with-out any clothes in the drum.Cleaning the pumpThe pump should be inspected regularly and particular

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Control panel _ _ _ _ _ _ _ _ _ _ _

Cleaning the water inlet filtersImportant! If the appliance doesn't fill, takes long to fillwith water, the starting button blinks yellow or the

After removing all thepackaging, carefully laymachine on it's back to re-move the polystyrenebase from the bottom.Remove the power supplycable an

The other end of the inlet hose which connects to theappliance can be turned as showed in the picture.Do not place the inlet hose downwards. Angle the

If the outlet spigot hasnot been used before, re-move any blanking plugthat may be in place.Push the drain hose ontothe spigot and securewith a clip,

12341 Green & Yellow2 Brown3 Cord clamp4 BlueThe wire coloured green and yellow must be connectedto the terminal marked with the letter «E» or by

25

26

27

www.zanussi.com/shop 192994972 - 00 - 182010

• If the machine is situated on a carpeted floor, pleaseadjust the feet in order to allow air to circulate freelyunder the appliance.• Always be sure,

Product description1 Detergent dispenser drawer2 Control panel3 Door opening handle4 Rating plate5 Drain pump6 Adjustable feet1 23456Detergent dispens

1 2 3 4 5 6 7 81 Programme selector dial2 SPIN reduction button3 OPTIONS button4 EXTRA RINSE button5 Display6 START/PAUSE button7 DELAY START button8

Super QuickA very short cycle for lightly soiled items or for laundrywhich needs only freshening up. We recommend thatyou reduce the amount of fabric

During the washing cycle the display shows a temper-ature icon to indicate that the appliance has startedthe heating phase of the water in the tub.5.3

Pull out the dispenser drawer until it stops. Measureout the amount of detergent required, pour it into themain wash compartment or in the appropriat

Altering an option or a running programmeIt is possible to change some options before the pro-gramme carries them out.Before you make any change, you