Zanussi ZWH6140P Bedienungsanleitung PDF herunterladen (Seite 8)

Positioning and levelling

x 4

Level the appliance by raising or lowering the feet.

The appliance MUST be level and stable on a flat hard

floor. If necessary, check the setting with a spirit level.

Any necessary adjustment can be made with a spanner.

Accurate levelling prevents vibration, noise and dis-

placement of the appliance during operation.

Repeat the levelling action, if the appliance is not level

and stable.

Water inlet

Connect the hose to a tap

with a 3/4” thread.

35°

45°

Loosen the ring nut to angle the hose to the left or right

depending on the position of your water tap. Do not

place the inlet hose downwards. After positioning the

inlet hose, be sure to tighten the ring nut again to pre-

vent leaks.

Water drainage

Firstly form a hook in the end of the drain hose using

the plastic hose guide supplied with the appliance .

The end of the drain hose can be positioned in four

ways:

• Hooked over the edge of a sink using the plastic

hose guide.

Tie the plastic hose guide to the tap with a string to pre-

vent that the drain hose unhooks when the appliance is

emptying.

• Onto a sink outlet spigot.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Keine Kommentare

Zanussi ZWH6140P Bedienungsanleitung Seite 8