Zanussi ZWI71201WA Bedienungsanleitung PDF herunterladen (Seite 22)

Spin Speed Maximum 1200 rpm

Installation

Unpacking

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all transit devices so

that they can be refitted if the machine ever has

to be transported again.

After removing all the

packaging, carefully

lay machine on it's

back to remove the

polystyrene base

from the bottom.

Remove the power

supply cable and the

hose from the hose

holders on the rear of

the appliance.

Unscrew the three

bolts.

Slide out the relevant

plastic spacers.

Open the porthole,

remove the polystyr-

ene block fitted on

the door seal and pull

out all items from the

drum.

Fill the smaller upper

hole and the two

large ones with the

corresponding plastic

plug caps supplied in

the bag containing

the instruction book-

let.

Positioning

Install the machine on a flat hard floor. Make

sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that

the machine does not touch the wall or other

kitchen units. Level the washing machine by

raising or lowering the feet. The feet may be

tight to adjust as they incorporate a self locking

nut, but the machine MUST be level and stable.

Any necessary adjustment can be made with a

spanner.

Accurate levelling prevents vibration, noise and

displacement of the machine during operation.

Never place cardboard, wood or similar materi-

als under the machine to compensate for any

unevenness in the floor.

If necessary, check

the setting with a spi-

rit level.

22

www.zanussi.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare