Zanussi ZWSE7120V Bedienungsanleitung PDF herunterladen (Seite 9)

Rinse Hold button (Rinse Hold)

Set this function to prevent the laundry crea-

ses.

There is a water in the drum when the

programme is completed.

Super quick button (Quick Wash)

Press this button to decrease the programme

duration.

Set this function for items with light soil or

items to refresh.

Extra rinse button (Extra Rinse)

Press this button to add rinsing phases to a

programme.

Use this function for persons allergic to deter-

gents and in areas where the water is soft.

Delay start button (Delay Start)

Press this button to delay the start of a pro-

gramme from 30 minutes to 20 hours.

Door indicator

• You cannot open the appliance door when

the indicator is on.

• You cannot open the appliance door when

the indicator flashes. Wait for some minutes

before you open the door.

• You can open the door only when the indi-

cator goes off.

If the programme is completed but the

indicator stays on:

• There is water in the drum.

• The 'Rinse Hold' function is on.

Child lock function

This function prevents the children to play with

the control panel.

• To activate the function, press the button

“Тemperature” and the button “Spin” at the

same time until the display shows the sym-

bol

.

• To deactivate the function, press the same

buttons until the symbol

goes off.

You can activate the function:

• Before you press the Start/Pause button:

the appliance cannot start.

• After you press the Start/Pause button, all

the buttons and the programme knob do not

operate.

Acoustic signals function

The acoustic signals operate when:

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic signals,

press the button “Rinse Hold” and the button

“Quick Wash” at the same time for 6 seconds.

If you deactivate the acoustic signals,

they continue operate when the appliance

has a malfunction.

Permanent extra rinse function

With this option you can permanently have an

extra rinse when you set a new programme.

• To activate this function press the button

“Rinse Hold” and the button “Extra Rinse” at

the same time. The indicator of the button

“Extra Rinse” comes on.

• To deactivate this function press the same

buttons again until the indicator of the but-

ton “Extra Rinse” goes off.

Before first use

1. Put 2 litre of water in the detergent com-

partment for washing phase. This acti-

vates the drain system.

2. Put a small quantity of detergent in the

compartment for washing phase.

3. Set and start a programme for cotton at

the highest temperature without laundry.

This removes all possible dirt from the

drum and the tub.

9

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare