Zanussi ZDT13012FA Bedienungsanleitung PDF herunterladen (Seite 6)

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

Level

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

< 4 < 7 < 0.7 < 5

1

2)

1) Factory position.

2) Do not use salt at this level.

Electronic adjustment

1. Press the on/off button to activate the ap-

pliance.

2. If necessary, do the Reset function.

3. Press and hold the programme button until

the programme indicator

starts to flash

and the programme indicator

comes on with fixed light.

4.

Wait until the programme indicator

goes off and the end indicator starts to

flash. The programme indicator

contin-

ues to flash.

5. Press the programme button. The end indi-

cator starts to flash. The intermittent flash-

ing of the end indicator refers to the cur-

rent set level.

• E.g. 5 flashes + pause + 5 flashes =

level 5.

6. Press the programme button again and

again to change the setting. Each time you

press the programme button the level num-

ber increases.

7. Press the on/off button to deactivate the

appliance and to confirm the setting.

Filling the salt container

Caution! Water and salt can come out

from the salt container when you fill it.

Risk of corrosion. To prevent it, after you fill

the salt container, start a programme.

1

2

3

4

Put 1 litre of water in the salt container (only

for the first time).

6

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare