Zanussi ZBB28651SA Bedienungsanleitung PDF herunterladen (Seite 29)

4. Remove the lower door.

5. Loosen the lower pin.

6. Install the lower pin on the opposite side.

7. Tighten the middle hinge.

8. Install the upper door.

9. Tighten the spacer and tighten the upper

pin.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the

cabinet.

• The door opens and closes

correctly.

If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit

perfectly to the cabinet. In that case,

wait for the natural fitting of the

gasket. In case you do not want to

carry out the above mentioned

operations, contact the nearest After

Sales Service Force. The After Sales

Service specialist will carry out the

reversibility of the doors at your cost.

Technical information

Technical data

Dimensions of the recess Height × Width × Depth (mm):

1780 mm x 560 mm x 550 mm

Rising time 20 h

Voltage 230-240 V

Frequency 50 Hz

The technical information is situated on the

rating plate on the internal left side of the

appliance and in the energy label.

Noises

There are some sounds during normal running (compressor, refrigerant circulation).

www.zanussi.com 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Keine Kommentare

Zanussi ZBB28651SA Bedienungsanleitung Seite 29