Zanussi ZCE64010WA Bedienungsanleitung PDF herunterladen (Seite 20)

Minimum distances

Dimension mm

A 685

LEVELLING OF THE APPLIANCE

Use small feet on the bottom of appliance to set the

appliance top surface level with other surfaces.

ANTI-TILT PROTECTION

CAUTION! Install the anti-tilt

protection to prevent the appliance

from falling under incorrect loads. The

anti-tilt protection only works when the

appliance is put in a correct area.

Your appliance has the symbols

shown on the pictures (if applicable)

to remind you about the installation of

the anti-tilt protection.

CAUTION! Make sure you install the

anti-tilt protection at the correct

height.

Make sure that the surface behind the appliance is

smooth.

1. Set the correct height and area for the

appliance before you attach the anti-tilt

protection.

2. Install the anti-tilt protection 176 mm down

from the top surface of the appliance and 24

mm from the left side of the appliance into the

circular hole on the bracket. See the illustration.

Screw it into the solid material or use

applicable reinforcement (wall).

3. You can find the hole on the left side at the

back of the appliance. See the illustration. Put

the appliance in the middle of the space

between the cupboards (1). If the space

between the bench cupboards is larger than

the width of the appliance, you must adjust the

side measurement to centre the appliance.

1 2 ... 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Zanussi ZCE64010WA Bedienungsanleitung Seite 20