Zanussi ZEI7744BBA Bedienungsanleitung PDF herunterladen (Seite 8)

Heat setting

The hob deactivates

after

5 4 hours

6 - 9 1.5 hour

THE HEAT SETTING

To set or change the heat setting:

Touch the control bar at the correct heat setting or

move your finger along the control bar until you

reach the correct heat setting.

BRIDGE FUNCTION

The function operates when the pot

covers the centres of the two zones.

This function connects two cooking zones and they

operate as one.

First set the heat setting for one of the cooking

zones.

To activate the function for left / right

cooking zones: touch / . To set or change

the heat setting touch one of the left / right control

sensors.

To deactivate the function: touch / . The

cooking zones operate independently.

AUTOMATIC HEAT UP

Activate this function to get a desired heat setting

in a shorter time. When it is on, the zone operates

on the highest setting in the beginning and then

continues to cook at the desired heating setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking zone:

touch ( comes on). Immediately touch a

desired heat setting. After 3 seconds comes on.

To deactivate the function: change the heat

setting.

POWER FUNCTION

This function makes more power available to the

induction cooking zones. The function can be

activated for the induction cooking zone only for a

limited period of time. After this time the induction

cooking zone automatically sets back to the highest

heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking zone:

touch . comes on.

To deactivate the function: change the heat

setting.

TIMER

You can set one timer function for each cooking

zone separately. To set a timer function for the

zones on the left side use the timer on the left, for

the zones on the right, the timer on the right.

Count Down Timer

Use this function to specify how long a cooking

zone should operate during a single cooking

session.

First set the heat setting for the cooking zone and

then set the function.

To activate the function or change the time:

touch quickly again and again until the indicator

of a given zone lights up on the display. Then

touch or to set the time (00 - 99 minutes).

The function starts automatically after 4 seconds.

comes on the display.

To activate the timer function for the second zone in

a pair touch 3 times quickly.

When the time comes to an end, a signal sounds

and 00 flashes. Touch to stop the signal.

To see the remaining time: touch

To deactivate the function: choose the desired

zone touching and then touch . The

remaining time counts back to 00. The symbol

goes out.

Minute Minder

You can use this function as a Minute Minder

when the hob is activated but the cooking zones do

not operate.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Zanussi ZEI7744BBA Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Zanussi ZEI7744BBA