Zanussi ZGF752IX Bedienungsanleitung PDF herunterladen (Seite 8)

Lighting the burnersLighting the burners

Lighting the burners

For easier lighting, proceed before putting a pan on the panFor easier lighting, proceed before putting a pan on the pan

For easier lighting, proceed before putting a pan on the pan

support.support.

support.

To light a burner:

z turn the relevant knob anti-clockwise to maximum position ( ), then

push it down to ignite the burner.

z Then, check that the flame is regular adjust it as required.

If the burner does not ignite, turn the control knob to zero, and try again.

If you cannot light the flame even after

severalattempts, check the "cap" (Fig. 1

lett.

A) and the"crown" (Fig. 1 lett.

B) are in

the correct position.

When switching on the mains, after

installation or a power cut, it is quite

normal for the spark generator to be

activated automatically.

In the absence of electricityIn the absence of electricity

In the absence of electricity, ignition

can occur without the electrical device; in

this case, approach the burner with a

flame, push the relevant knob down and

turn it anti-clockwise until it reaches the

maximum position.

If the control knobs become difficult to

turn, please contact your local Service

Force Centre.

Operation

)

Fig. 1

A - Burner cap

B - Burner crown

C - Ignition electrode

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Keine Kommentare

Zanussi ZGF752IX Bedienungsanleitung Seite 8