Zanussi Z 8050 WOS Bedienungsanleitung PDF herunterladen (Seite 26)

These operations must be carefully ful-

filled as follows.

GAS CONNECTION

– Connect the cooker to the gas mains

utilizing rigid or flexible pipes.

– The connection must be executed to

the rear of appliance (left or right) (fig.

8.1); the pipe do not cross the cooker.

– The unused end inlet pipe of the cook-

er (left or right) must be closed with the

plug interposing the gasket.

Natural gas G20

– Fit up the holder “C” interposing gasket

“D”.

– Connect the cooker to the gas net by a

suitable rubber tube (inside diameter

15 mm).

ake sure the tube is snugly fit at both

ends and use a standard tube clamp (not

supplied) to fasten it.

L.P.G. G30 / G31

– Fit up the holder “B” interposing gasket

“D”.

– Connect the cooker to the cylinder

pressure regulator by a suitable rubber

tube (inside diameter 6 mm).

ake sure the tube is snugly fit at both

ends and use a standard tube clamp (not

supplied) to fasten it.

The rubber tube:

- must be as short as possible, with-

out contractions or kinks;

- must be easy to inspect along its

entire length to check its wear;

- must never be at any point in its

length in contact with the “hot” parts

of the cooker.

Gas connection for:

Cat: II 2H3+

The fitting (fig. 8.2) is made up of:

– 1 adapter “C” for G20

– 1 adapter “B” for G30/G31

– gasket “D”

B C

Fig. 8.2

Fig. 8.3

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Zanussi Z 8050 WOS Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Zanussi Z 8050 WOS