Zanussi ZEV8646XBA Bedienungsanleitung PDF herunterladen (Seite 10)

Warning! The sharp objects and abrasive

cleaning agents can cause damage to the

appliance.

For your safety, do not clean the appliance with

steam cleaners or high-pressure cleaners.

Scratches or dark stains on the glass-ce-

ramic cause no effect on how the appli-

ance operates.

To remove the dirt:

1. – Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the appli-

ance. Use a special scraper for the

glass . Put the scraper on the glass sur-

face at an acute angle and move the

blade on the surface .

– Remove after the appliance is suffi-

ciently cool: limescale rings , water

rings, fat stains, shiny metallic discolora-

tions. Use a special cleaning agent for

glass ceramic or stainless steel.

2. Clean the appliance with a moist cloth and

some detergent.

3. At the end rub the appliance dry with a

clean cloth.

What to do if…

Problem Possible cause and remedy

You cannot activate the appliance

or operate it.

• Activate the appliance again and set the heat setting in 10 seconds.

• You touched 2 or more sensor fields at the same time. Only touch

one sensor field.

• The Child Safety Device or the Lock operates. See the chapter Op-

erating instructions.

• There is water or fat stains on the control panel. Clean the control

panel.

A Sound operates and the appli-

ance deactivates.

A sound operates when the appli-

ance is deactivated.

You put something on one or more sensor fields. Remove the object

from the sensor fields.

The appliance deactivates.

You put something on the . Remove object from the sensor field.

The residual heat indicator does

not comes on.

The cooking zone is not hot because it operated only for a short time. If

the cooking zone should be hot, speak to the service centre.

The Automatic Heat Up function

does not operate.

• There is still residual heat on the cooking zone. Let the cooking zone

become sufficiently cool.

• The highest heat setting is set. The highest heat setting has the same

power as the Automatic Heat Up function.

•

You decreased the heat setting from

. Start from and only in-

crease the heat setting.

You cannot activate outer ring. Activate the inner ring first.

The sensor fields become hot. The cookware is too large or you out it too near to the controls. Put

large cookware on the rear cooking zones if it is necessary.

comes on

The Automatic Switch Off operates. Deactivate the appliance and acti-

vate it again.

and number comes on.

There is an error in the appliance.

Disconnect the appliance from the electrical supply for some time. Dis-

connect the fuse from the electrical system of the house. Connect

again. If

comes on again, speak to the service centre.

www.zanussi.com

1 2 ... 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Zanussi ZEV8646XBA Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Zanussi ZEV8646XBA