Zanussi ZGG35214XA Bedienungsanleitung Seite 1

ENUser manualHobZGG35214IT

• If you change from liquid gas to natural gasG20 20 mbar, undo the by-pass screw ap-proximately 1/4 of a turn.Warning! Make sure the flame does notgo

min 20 mm(max 150 mm)30 mm60 mmBAa) Removable panelb) Space for connectionsKitchen unit with ovenThe hob recess dimensions must obey the indi-cation a

BURNER NORMAL POWER kW inj. 1/100 mmRapid 3.0 119Gas burners for LPG G30/G31 28-30/37 mbarBURNERNORMALPOWERkWinj.1/100 mmG3028–30 mbarG3137 mbarg/h g/

13www.zanussi.com

14 www.zanussi.com

15www.zanussi.com

www.zanussi.com/shop 892953055-C-512012

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _ _

• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off the a

• Use only correct isolation devices: line pro-tecting cut-outs, fuses (screw type fuses re-moved from the holder), earth leakage tripsand contactors.

DisposalWarning! Risk of injury or suffocation.• Contact your municipal authority for informa-tion on how to discard the appliance correct-ly.• Discon

ABCDA) Burner capB) Burner crownC) Ignition candleD) ThermocoupleWarning! Do not keep the control knobpushed for more than 15 seconds.If the burner do

Care and cleaningWarning! Refer to the Safety chapters.Warning! Deactivate the appliance andlet it cool down before you clean it.Disconnect the applia

Problem Possible cause RemedyThe flame is blow out immediatelyafter ignition• Thermocouple is not heatedsufficient• After lightning the flame, keepthe

Warning! The following instructions aboutinstallation, maintenance and ventilationmust be carried out by qualified personnel incompliance with the reg