Zanussi ZGL 643 ITX Bedienungsanleitung PDF herunterladen (Seite 19)

Product description

Cooking surface layout

ZGL643IT

1 Semi-rapid burner

2 Semi-rapid burner

3 Control knobs

4 Spark generator button

5 Auxiliary burner

6 Rapid burner

ZGL683IT

1 Semi-rapid burner

2 Semi-rapid burner

3 Control knobs

4 Spark generator button

5 Auxiliary burner

6 Triple Crown burner

Control knobs

Symbol Description

no gas supply / off position

Symbol Description

maximum gas supply

minimum gas supply

Operation

Ignition of the burner

Warning! Be very careful when you use open fire in

kitchen environment. Manufacturer decline any

responsibility in case misuse of the flame

Always light the burner before you put cookware.

To light the burner:

Push and hold the spark generator button

2. Turn the control knob counterclockwise to the maxi-

mum position

3. Release the spark generator button but keep the con-

trol knob on this position for approximately 5 sec-

onds; this will let thermocouple to warm up. If not,

the gas supply will be interrupted.

4. Adjust the flame after it is regular.

If after some tries the burner does not light, check if

the crown and its cap are in correct positions.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Keine Kommentare

Zanussi ZGL 643 ITX Bedienungsanleitung Seite 19