Zanussi ZGM782IX Bedienungsanleitung

GAS HOBZGM 782INSTRUCTION BOOKLETPlease read this instruction booklet before using the applianceGB

10Dimensions are given in mm.Building InBuilding over a cupboard ordrawerIf the hob is to be installed above a cupboard or drawer itwill be necess

11Electrical connectionsAny electrical work required to install this hobshould be carried out by a qualified electrician orcompetent person, in

12Fault FindingPreliminary Electrical SystemsCheckA. EARTH CONTINUITY CHECK - Appliance mustbe electrically disconnected - meter set on W(Ohm

13Ignition System / Gas IgnitionYESCheck plug top fuseandreplace if necessaryCheck polarity andearth continuity ofsupply pointCheck earth continuityof

14CommissioningWhen the hob has been fully installed it will be necessaryto check the minimum flame setting. To do this, followthe procedure below.- T

15

35679-0201 01/03Grafiche MDM - ForlìCUSTOMER CAREZanussi55-77 High StreetSloughBerkshire, SL1 1DZTel: 08705 727727© Electrolux plc 2003 Fr

2This appliance complies with the followingE.E.C. Directives:* 73/23 - 90/683(Low VoltageDirective);* 93/68 (General Directives);* 89/336 (Electromagn

3For the UserContentsFor the Installer1. Auxiliary Burner2. Semi-rapid Burners3. Rapid Burner4. Ultra-rapid Triple-crown Burner5. Control knobsDescrip

4Maintenance and CleaningOperationHob burnersTo light a burner:l push in the relevant control knob and turn itanticlockwise to maximum positio

5Something Not Working?If the hob is not working correctly, please carry out the following checks before contacting your local Zanussi ServiceForce Ce

6In the event of your appliance requiring service, or if youwish to purchase spare parts, please contact your localZanussi Service Force Centre by tel

7BURNER RAPID SEMI-RAPID AUXILIARY(large) (medium) (small)POSITION MAX MIN MAX MIN MAX MIN MAX MIN NOMINAL THERMAL POWER kW 2.8 0.65 2.0

8FITTING THE GAS HOBWITHOUT A COOKER HOOD ABOVEFITTING THE GAS HOBWITH A COOKER HOOD ABOVE700 mm400 mm400 mm100 mm55 mm50 mm50 mm600 mm700 mm400 mm400

9Rectangular cut-out size for hobFO 2038Cut Out SizeThe dimensions of the cut-out are given in the diagram.InstallationIMPORTANT: This hob must be