Zanussi ZGS782ICTX Bedienungsanleitung PDF herunterladen (Seite 10)

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle

with a metal electrode. Keep these components well clean

to prevent difficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the pres-

sure adjuster, if fitted.

What to do if…

Problem Possible cause Remedy

There is no spark when lighting the

gas

• There is no electrical supply • Make sure that the unit is connec-

ted and the electrical supply is

switched on.

• Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

• Burner cap and crown are placed

uneven

• Make sure that the burner cap and

crown are in correct positions.

The flame is blow out immediately af-

ter ignition

• Thermocouple is not heated suffi-

cient

• After lightning the flame, keep the

knob pushed for approximately 5

seconds.

The gas ring burns unevenly • Burner crown is blocked with food

residues

• Make sure that the injector is not

blocked and the burner crown is

clear of food particles.

www.zanussi.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Zanussi ZGS782ICTX Bedienungsanleitung Seite 10