Zanussi ZWD1261 Bedienungsanleitung Seite 16

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 28
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 15
6. Start the programme by pressing button 7 . After the
programme has started, the time remaining is upda-
ted every minute.
7. At the end of the programme the buzzer sounds. A
flashing zero «
» appear on the display. At this
point of the programme, starts an anti-crease phase
which lasts about 10 minutes. During this time the
door is locked and the display keeps showing the
flashing zero « ». (If you wish to open the door
before or during the anti-crease phase, please follow
the instructions given in the previous chapter).
8.
Turn the selector dial to the
position to switch
the machine off.
9. Remove the laundry.
Care and cleaning
Warning! You must DISCONNECT the appliance
from the electricity supply, before you can carry out
any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea
to periodically use a water softening powder in the ma-
chine. Do this separately from any laundry washing, and
according to the softening powder manufacturer's in-
structions. This will help to prevent the formation of lime
deposits.
External cleaning
Clean the exterior cabinet of the appliance with soap and
water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser drawer
should be cleaned regularly.
Remove the drawer by
pressing the catch down-
wards and by pulling it
out. Flush it out under a
tap, to remove any traces
of accumulated powder.
To aid cleaning, the top
part of the additive com-
partment should be re-
moved.
Cleaning the drawer recess
Having removed the draw-
er, use a small brush to
clean the recess, ensuring
that all washing powder
residue is removed from
the upper and lower part of
the recess.
Replace the drawer and run the rinse programme with-
out any clothes in the drum.
Cleaning the pump
The pump should be inspected regularly and particularly
if:
the appliance does not empty and/or spin;
the appliance makes an unusual noise during draining
due to objects such as safety pins, coins etc. blocking
the pump;
a problem with water draining is detected (see chapter
“What to do if...” for more details).
Warning! Before opening the pump door, switch
the appliance off and remove the mains plug from
the socket.
Proceed as follows:
Unplug the appliance.
If it is necessary, wait until the water has cooled down.
16
Seitenansicht 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare