Zanussi ZRG16600WA Bedienungsanleitung PDF herunterladen (Seite 13)

If the refrigerant circuit should become dam-

aged:

– avoid open flames and sources of ignition

– thoroughly ventilate the room in which the

appliance is situated

• It is dangerous to alter the specifications or

modify this product in any way. Any damage

to the cord may cause a short-circuit, fire

and/or electric shock.

Warning! Any electrical component (pow-

er cord, plug, compressor) must be re-

placed by a certified service agent or qualified

service personnel to avoid hazard.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not

squashed or damaged by the back of the

appliance. A squashed or damaged pow-

er plug may overheat and cause a fire.

3. Make sure that you can come to the

mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not

insert the power plug. There is a risk of

electric shock or fire.

6. You must not operate the appliance with-

out the lamp cover (if foreseen) of interior

lighting.

• This appliance is heavy. Care should be taken

when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are damp/

wet, as this could cause skin abrasions or

frost/freezer burns.

• Avoid prolonged exposure of the appliance to

direct sunlight.

• Bulb lamps (if foreseen) used in this appli-

ance are special purpose lamps selected for

household appliances use only. They are not

suitable for household room illumination.

Daily use

• Do not put hot pot on the plastic parts in the

appliance.

• Do not store flammable gas and liquid in the

appliance, because they may explode.

• Appliance's manufacturers storage recom-

mendations should be strictly adhered to. Re-

fer to relevant instructions.

Care and cleaning

• Before maintenance, switch off the appliance

and disconnect the mains plug from the

mains socket.

• Do not clean the appliance with metal ob-

jects.

• Regularly examine the drain in the refrigerator

for defrosted water. If necessary, clean the

drain. If the drain is blocked, water will collect

in the bottom of the appliance.

Installation

Important! For electrical connection carefully

follow the instructions given in specific

paragraphs.

• Unpack the appliance and check if there are

damages on it. Do not connect the appliance

if it is damaged. Report possible damages

immediately to the place you bought it. In that

case retain packing.

• It is advisable to wait at least four hours be-

fore connecting the appliance to allow the oil

to flow back in the compressor.

• Adequate air circulation should be around the

appliance, lacking this leads to overheating.

To achieve sufficient ventilation follow the in-

structions relevant to installation.

• Wherever possible the back of the product

should be against a wall to avoid touching or

catching warm parts (compressor, condens-

er) to prevent possible burn.

• The appliance must not be located close to

radiators or cookers.

• Make sure that the mains plug is accessible

after the installation of the appliance.

• Connect to potable water supply only (If a

water connection is foreseen).

Service

• Any electrical work required to do the servic-

ing of the appliance should be carried out by

a qualified electrician or competent person.

13

www.zanussi.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare