Zanussi ZSA 15 Installationshandbuch PDF herunterladen (Seite 6)

ELECTRICAL CONNECTION

We strongly recommend that all operations for the

installation of your oven be carried out by

QUALIFIED PERSONNEL to the relevant British

Standards.

The oven designed to be connected to 240V (50Hz)

electricity supply.

The oven has an easily accessible terminal block

which is marked as follows:

Letter L - Live terminal

Letter N - Neutral terminal

- Earth terminal

THIS APPLIANCE MUST BE EARTHED

The cable used to connect the oven to the electrical

supply should have the characteristics indicated in

the table.

It is necessary that you install a double pole switch

between the appliance and theelectricity supply

(mains), with a minimum gap of 3mm between the

switch contacts and of a type suitable for the

required load in compliance with the current rules.

The switch must not break the yellow and green

earth cable at any point.

Important

After installation and connecting, the cable must be

placed so that it cannot at any point reach a

temperature of more than 50°C above the ambient

temperature.

Before the appliance is connected, check that the

main fuse and the domestic installation can support

the load; and that the power supply is properly

earthed.

The manufacturer disclaims any responsibility should

these safety measures not be carried out.

This appliance meets the requirements laid down in

EEC Directive No. 89/336 relating to the suppression

of radio and TV interference.

Models Rating Cable cross Fuse

section mm

and

Type of the cable min.

ZSA15

2565 W 6 mm

6242 Y 15 A

For Uk use only

Models Rating Cable cross Fuse

section mm

and

Type of the cable min.

ZSA15

2565 W 2,5 mm

Ho5 RR-F 13 A

For Europe use only

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Zanussi ZSA 15 Installationshandbuch Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Küchen- und Haushaltswarenzubehör Zanussi ZSA 15