Zanussi ZWG7120K Bedienungsanleitung PDF herunterladen (Seite 26)

Temperature button (Temp.)

Press this button to change the default temper-

ature.

Symbol

— cold water.

Spin button (Centrigugeren/ Essorage)

With this button you can decrease the spin

speed.

The indicator of the set speed comes on.

Rinse Hold button (Spoelstop/ Anti-

froissage)

Set this function to prevent the laundry creases.

There is a water in the drum when the pro-

gramme is completed.

Super quick button (Supersnel/ Rapide)

Press this button to decrease the programme

duration.

Set this function for items with light soil or

items to refresh.

Extra rinse button (Extra spoelen/

Rinçage plus)

Press this button to add rinsing phases to a

programme.

Use this function for persons allergic to deter-

gents and in areas where the water is soft.

Delay start button (Startuitstel/Départ

différé)

Press this button to delay the start of a pro-

gramme from 30 minutes to 20 hours.

Permanent extra rinse function

With this option you can permanently have an

extra rinse when you set a new programme.

• To activate this function press the button

“Spoelstop/ Anti-froissage” and the button

“Extra spoelen/ Rinçage plus” at the same

time. The indicator of the button “Extra spoe-

len/ Rinçage plus” comes on.

• To deactivate this function press the same

buttons again until the indicator of the button

“Extra spoelen/ Rinçage plus” goes off.

Child lock function

This function prevents the children to play with

the control panel.

• To activate the function, press the button

“Temp.” and the button “Centrigugeren/ Es-

sorage” at the same time until the display

shows the symbol

.

• To deactivate the function, press the same

buttons until the symbol

goes off.

You can activate the function:

• Before you press the Start/Pauze Départ/

Pause button: the appliance cannot start.

• After you press the Start/Pauze Départ/

Pause button, all the buttons and the pro-

gramme knob do not operate.

Acoustic signals function

The acoustic signals operate when:

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic signals,

press the button “Spoelstop/ Anti-froissage”

and the button “Supersnel/ Rapide” at the

same time for 6 seconds.

If you deactivate the acoustic signals, they

continue operate when the appliance has

a malfunction.

Before first use

Put a small quantity of detergent in the main

wash compartment of the detergent dispenser.

Set and start a programme for cotton at the

highest temperature without laundry. This re-

moves all possible dirt from the drum and the

tub.

Daily use

1. Open the water tap.

2. Connect the mains plug to the mains sock-

et.

3. Put the laundry in the appliance.

4. Use the correct quantity of detergent and

additives.

26

www.zanussi.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare