
Be very careful when you replace
the pan supports to prevent the
hob top from damage.
2. The enamel coating occasionally can have
rough edges, so be careful when you wash the
pan supports by hand and dry them. If
necessary, remove stubborn stains with a paste
cleaner.
3. After you clean the pan supports, make sure
that they are in correct positions.
4. For the burner to operate correctly, make sure
that the arms of the pan supports are .
PERIODIC MAINTENANCE
Speak to your local Authorised Service Centre
periodically to check the conditions of the gas
supply pipe and the pressure adjuster, if fitted.
OVEN - DAILY USE
WARNING! Refer to Safety chapters.
OVEN FUNCTIONS
Oven function Application
Off position The oven is off.
MIN -
240°C
Heat settings Range of temperature adjustment.
Grilling To grill flat food in the middle of the grill. To make
toast.
Oven lamp To illuminate the oven interior.
To use this function, press the button for the lamp.
Turnspit To spit roasting meat.
IGNITION OF THE OVEN GAS BURNER
CAUTION! When turning on the oven
burner the oven door must be opened.
CAUTION! Make sure that the lid is
opened. When using the oven the lid
has to be opened to avoid over-
heating.
Oven safety device:
The gas oven has a thermocouple. It
stops the gas flow if the flame goes
out.
1. Open the oven door.
2. Ignite the oven gas burner.
• For integrated ignition on the control knob
turn the knob for the oven functions
counterclockwise to the maximum heat
settings and push it to light the burner.
Keep the knob for the oven functions pushed
for 15 seconds or less to let the thermocouple
warm up. If not, the gas flow is interrupted.
MANUAL IGNITION OF OVEN GAS BURNER
In case of absence of the electricity you can ignite
the oven burner without an electrical device.
1. Open the oven door.
2. Hold the flame near the hole in the bottom of
the oven cavity.
10
Kommentare zu diesen Handbüchern