Zanussi ZCV65030WA Bedienungsanleitung PDF herunterladen (Seite 21)

• Clean all accessories after each use and let

them dry. Use a soft cloth with warm water and

a cleaning agent.

• If you have nonstick accessories, do not clean

them using aggressive agents, sharp-edged

objects or a dishwasher. It can cause damage

to the nonstick coating.

STAINLESS STEEL OR ALUMINIUM

APPLIANCES

Clean the oven door with a damp cloth

or sponge only. Dry it with a soft cloth.

Do not use steel wool, acids or

abrasive materials as they can damage

the oven surface. Clean the oven

control panel with the same

precautions.

REMOVING THE OVEN DOOR

To make the cleaning easier, remove the door.

1

2

1. Open the door fully.

2. Move the slider until you hear a click.

3. Close the door until the slider locks.

4. Remove the door.

To remove the door, pull the door outwards first

from one side, and then the other.

When the cleaning procedure is completed, insert

the oven door in the opposite sequence. Make sure

that you hear a click when you insert the door. Use

force if necessary.

REMOVING AND CLEANING THE DOOR

GLASSES

The door glass in your product can be

different in type and shape from the

examples you see in the images. The

number of glasses can also be

different.

1. Hold the door trim B on the top edge of the

door at the two sides and push inwards to

release the clip seal.

1

2

B

2. Pull the door trim to the front to remove it.

3. Hold the door glass panels on their top edge

one by one and pull them upwards from the

guide.

4. Clean the door glass panels.

To install panels, do the same steps in reverse.

REPLACING THE LAMP

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING! Danger of electrocution!

Disconnect the fuse before you

replace the lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

The lamp glass cover is at the back of

the cavity.

1. Turn the lamp glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300 °C

heat-resistant oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare