Zanussi ZGG782CTN Bedienungsanleitung PDF herunterladen (Seite 41)

41

Fitting the hob to the

worktop

Before fitting the hob into the cut

out, an adhesive seal must be fitted

to the underside outside edge of

the hob. It is essential that no gaps

are left in this seal in order to

prevent spillage near the hob

seeping into the cabinet below.

1. Remove the pan supports, the

burners caps and crowns and turn

the hob upside down, taking care

the ignition candles are not

damaged in this operation.

2. Place the sealing gasket all around

the glass top edge (Fig. 2).

3. Place the hob in the cut out, taking

care of its centring.

4. Fix the hob with the relevant

screws (see Fig. 3).

The edge of the hob forms a double

labyrinth seal which provides a total

guarantee against infiltration of

liquids.

)

a) Sealing gasket

Fig. 2

Fig. 3

a

1 2 ... 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare