Zanussi ZCE6601MW Bedienungsanleitung PDF herunterladen (Seite 22)

Dimension mm

B 685

Levelling

Use small feet on the bottom of appliance to

set the appliance top surface level with other

surfaces.

Anti-tilt protection

Caution! You must install the anti-tilt

protection. If you do not install it, the

appliance can tilt.

Your appliance has the symbol shown on the

picture (if applicable) to remind you about the

installation of the anti-tilt protection.

Important! Make sure you install the anti-tilt

protection at the correct height.

1. Set the correct height and area for the ap-

pliance before you attach the anti-tilt pro-

tection.

2. Install the anti-tilt protection 77 mm down

from the top surface of the appliance and

49 mm from the side of the appliance into

the circular hole on a bracket (see fig.).

Screw it into the solid material or use ap-

plicable reinforcement (wall).

3. You can find the hole on the left and right

side on the back of the appliance.

The appliance is delivered with a left-hand

bracket. You can buy a right-hand bracket

at your local dealer.

Lift the front of the appliance (1) and put it

in the middle of the space between the

cupboards (2). If the space between the

bench cupboards is larger than the width

of the appliance, you must adjust the side

measurement to centre the appliance.

Make sure that the surface behind the ap-

pliance is smooth.

1

2

49 mm

77 mm

Electrical installation

The manufacturer is not responsible if you

do not follow the safety precautions from

the chapter "Safety information".

This appliance is supplied without a main plug

or a main cable.

Applicable cable types: H07 RN-F, H05 RN-F,

H05 RRF, H05 VV-F, H05 V2V2-F (T90), H05

BB-F.

22

www.zanussi.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare