
• Do not let cookware boil dry in order to pre-
vent damage to the cookware and hotplate.
• Do not use the solid hotplate with empty
cookware or without cookware.
• Do not put aluminium foil on parts of the ap-
pliance.
Disposal of the appliance
• To prevent the risk of physical injury or dam-
age
– Disconnect the appliance from the power
supply.
– Cut off the mains cable where it connects
with the appliance and discard it.
– Speak to your local authorised facilities for
disposal of your appliance.
Installation
Important safety requirements
This hob must be installed in accordance with
the IEE Wiring Regulations (Current Edition).
For appliances installed in the Republic of Ire-
land please refer to the ETCI Rules for Electri-
cal Installations.
Detailed recommendations are contained in the
following British Standards Codes Of Practice:
B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891
Current Editions.
Location
The appliance is of the type X and has been
designed to be built into or fitted next to the
unit according to the regulations in force (I.E.C.
335.2.6). The side walls of the unit must not ex-
ceed the height of the hob. Avoid installing the
appliance in the proximity of inflammable mate-
rials (curtains, tea towels etc.).
Installation
Warning! Read and follow the
instructions carefully. There is a risk of
injury or damage to the appliance.
• Make sure that the appliance is not damaged
because of transportation. Do not connect a
damaged appliance. If it is necessary, speak
to the supplier.
• Installation and connection of the ap-
pliance to the power supply must only
be done by qualified personnel.
• Only use built-in appliances after you assem-
ble the appliance into correct built-in units
and work surfaces that obey the standards.
• Do not change the specifications or modify
this product. There is a risk of injury or dam-
age to the appliance.
• Fully obey the laws, ordinances, directives
and standards in force in the country where
you use the appliance (safety regulations, re-
cycling regulations, electrical safety rules
etc.).
• Keep the minimum distances to other appli-
ances and units.
• Install anti-shock protection, for example in-
stall the drawers only with a protective panel
directly below the appliance.
• If the fixing bracket is near to the terminal
block, always make sure the connection ca-
ble does not come in contact with the edge
of the bracket.
• Prevent damage of the cut surfaces of the
worktop against moisture with a correct seal-
ant!
• Seal the appliance to the worktop with no
space left with a correct sealant.
• Prevent damage of the bottom of the appli-
ance from steam and moisture, e.g. from a
dishwasher or oven.
• Do not install the appliance adjacent to
doors and below windows. Hot cookware
can be hit off the hob when you open doors
or windows.
• Disconnect the appliance from the elec-
trical supply, before you do mainte-
nance work or cleaning.
4
www.zanussi.com
Kommentare zu diesen Handbüchern