Zanussi ZDI26022XA Bedienungsanleitung

GETTING STARTED?EASY.User ManualZDI26022XAEN User ManualDishwasher

STARTING A PROGRAMME1. Keep the appliance door ajar.2. Press the on/off button to activate theappliance. Make sure that the appliance is inprogramme s

The higher the content of these minerals, the harderyour water is. Water hardness is measured inequivalent scales.The water softener should be adjuste

CLEANING THE FILTERSBAC• Make sure that there are no residues of food or soil in or around the edge of the sump.• Put back in place the flat filter (C

The majority of problems that can occur canbe solved without the need to contact anAuthorised Service Centre.Problem and alarm code Possible cause and

Problem and alarm code Possible cause and solutionThe appliance trips the circuit-beaker.• The amperage is insufficient to supply simultaneously all t

Problem Possible cause and solutionThe interior of the appliance iswet.• This is not a defect of the appliance. it is caused by the hu-midity in the a

Capacity Place settings 13Power consumption Left-on mode (W) 5.0Power consumption Off-mode (W) 0.501) Refer to the rating plate for other values.2) If

17

18

19

SAFETY INFORMATIONBefore the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible for

WWW.ZANUSSI.COM/SHOP156925280-A-332017

• Put the cutlery in the cutlery basket with the sharp endspointing down or put them in the cutlery drawer in a horizontalposition with the sharp edge

WARNING! Dangerous voltage.• If the water inlet hose is damaged, immediatelyclose the water tap and disconnect the mainsplug from the mains socket. Co

Indicator DescriptionDrying phase. It comes on when the drying phase operates.End indicator.Rinse aid indicator. It is always off while the programme

ProgrammeDegree of soilType of loadProgramme phasesConsumption values1)Duration(min)Energy(kWh)Water(l)P6Rinse and Hold 5)All • Pre-wash 14 0.1 41) Th

German degrees(°dH)French degrees(°fH)mmol/l Clarke degreesWater softenerlevel43 - 46 76 - 83 7.6 - 8.3 53 - 57 937 - 42 65 - 75 6.5 - 7.5 46 - 52 829

While the drying phase operates, thedevice opens the appliance door. Thedoor is then kept ajar.By default, AirDry is activated with all programmesexcl

ADDING RINSE AID21 4321The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hotrinse phase.DAILY