Zanussi ZCM660NWC Bedienungsanleitung PDF herunterladen (Seite 19)

Warning! Your appliance has the symbol

shown on the picture (if applicable) to

remind you about the installation of the anti-tilt

protection.

Important! Make sure you install the anti-tilt

protection at the correct height.

110-115

mm

232- 237

mm

How to install the anti-tilt protection

1. Set the correct height and area for the ap-

pliance before you attach the anti-tilt pro-

tection.

2. Make sure that the surface behind the ap-

pliance is smooth.

3. Install the anti-tilt protection 232-237 mm

down from the top surface of the appliance

and 110-115 mm from the side of the ap-

pliance into the circular hole on a bracket.

Screw it into the solid material or use ap-

plicable reinforcement (wall).

4. You can find the hole on the left side at the

back of the appliance. See the illustration.

5. If you changed the dimensions of the cook-

er, you must align the non-tip device cor-

rectly.

Important! If the space between the bench

cupboards is larger than the width of the

appliance, you must adjust the side

measurement to center the appliance.

Electrical installation

The manufacturer is not responsible if you

do not follow safety precautions from the

chapter "Safety information".

This appliance is supplied without a main plug

and a main cable.

Applicable cable type: H05 RR-F with ade-

quate cross-section.

Warning! Before you connect the mains

cable to the terminal, measure the voltage

between phases in the house network.

Then, refer to the connection label at the back

of the appliance to use the correct electrical

installation

This order of steps prevents from installation

errors and damage to the electrical

components of the appliance.

The power cable must not touch the part

of the appliance shown in the illustration.

19

www.zanussi.com

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare