
contains starch), acrylamides can pose a health risk.
Thus, we recommend that you cook at the lowest
temperatures and do not brown food too much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Sharp objects and abrasive cleaning
agents will damage the appliance.
For your safety, do not clean the appliance with steam
blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic
have no effect on how the appliance operates.
To remove the dirt:
1. – Remove immediately: melted plastic, plastic foil,
and food with sugar. If not, the dirt can cause
damage to the appliance. Use a special scraper
for the glass . Put the scraper on the glass sur-
face at an acute angle and move the blade on the
surface .
– Remove after the appliance is sufficiently cool:
limescale rings , water rings, fat stains, shiny met-
allic discolorations. Use a special cleaning agent
for glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth and some de-
tergent.
3. At the end rub the appliance dry with a clean cloth.
What to do if…
Problem Possible cause and remedy
You cannot start the appliance or op-
erate it.
• You touched 2 or more sensor fields at the same time. Only touch one
sensor field.
• There is water or fat stains on the control panel. Clean the control panel
• Start the appliance again and set the heat setting within 10 seconds.
• The child safety device operates. See the chapter Operating the appliance.
A sound operates when the appli-
ance is off.
You covered one or more sensor fields. Uncover the sensor fields.
The residual heat indicator does not
come on.
The cooking zone is not hot because it operated only for a short time. If
the cooking zone is supposed to be hot, speak to the After Sales Service.
Heat setting alternates The Power management is active. See the section Power management.
A sound operates and appliance
starts and stops again. After 5 sec-
onds one more sound operates.
You covered . Uncover the sensor field.
comes on
• The automatic switch-off operates. Stop the appliance and start it again.
• Overheating protection for the cooking zone operates. Switch off the
cooking zone. Switch on the cooking zone again.
comes on
• No cookware on the cooking zone. Put cookware on the cooking zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for the cooking
zone. Move cookware to a smaller cooking zone.
19
Kommentare zu diesen Handbüchern