Zanussi ZDT13012FA Bedienungsanleitung PDF herunterladen (Seite 8)

2. Make sure that the salt container and the

rinse aid dispenser are full.

3. Start the shortest programme with a rins-

ing phase, without detergent and without

dishes.

4. Adjust the water softener to the water

hardness in your area.

5. Adjust the released quantity of rinse aid.

Setting and starting a programme

Reset function

For some settings it is necessary that the ap-

pliance is in user mode.

The appliance is in user mode when all the

programme indicators are on.

To set the appliance in user mode, do the Re-

set function

1. Press and hold the programme button until

all the programme indicators come on.

Starting a programme without delay start

1. Open the water tap.

2. Press the on/off button to activate the ap-

pliance.

3. Press the programme button again and

again until only the indicator of the pro-

gramme you want to set is on.

4. Close the appliance door. The programme

starts.

Starting a programme with delay start

1. Set the programme.

2. Press the delay button to delay the start of

the programme of 3 hours.

• The delay indicator comes on.

3. Close the appliance door. The countdown

starts.

• When the countdown is completed, the

programme starts.

Opening the door while the appliance

operates

If you open the door, the appliance stops.

When you close the door, the appliance con-

tinues from the point of interruption.

Cancelling the delay start while the

countdown operates

Do the Reset function.

When you cancel the delay start, you

have to set the programme again.

Cancelling the programme

Do the Reset function.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

At the end of the programme

The end indicator comes on.

1. Press the on/off button to deactivate the

appliance.

2. Close the water tap.

If you do not press the on/off button, the

AUTO OFF function automatically deacti-

vates the appliance a few minutes after the

end of the programme.

This helps to decrease the energy consump-

tion,

Important

• Let the dishes become cold before you re-

move them from the appliance. Hot dishes

can be easily damaged.

• First remove the items from the lower bas-

ket, then from the upper basket.

• There can be water on the sides and on the

door of the appliance. Stainless steel be-

comes cool more quickly than the dishes.

8

www.zanussi.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare