
REMOVING THE OVEN DOOR
To make the cleaning easier, remove the door.
1. Open the door fully.
2. Move the slider until you hear a click.
3. Close the door until the slider locks.
4. Remove the door.
To remove the door, pull the door outwards first
from one side, and then the other.
When the cleaning procedure is completed, insert
the oven door in the opposite sequence. Make sure
that you hear a click when you insert the door. Use
force if necessary.
REMOVING AND CLEANING THE DOOR
GLASSES
The door glass in your product can be
different in type and shape from the
examples you see in the images. The
number of glasses can also be
different.
1. Hold the door trim B on the top edge of the
door at the two sides and push inwards to
release the clip seal.
2. Pull the door trim to the front to remove it.
3. Hold the door glass panels on their top edge
one by one and pull them upwards from the
guide.
4. Clean the door glass panels.
To install panels, do the same steps in reverse.
OVEN CEILING
WARNING! Deactivate the appliance
before you remove the heating
element. Make sure that the appliance
is cold. There is a risk of burns.
Remove the shelf supports.
You can remove the heating element to clean the
oven ceiling more easily.
1. Remove the screw which holds the heating
element. For the first time, use a screwdriver.
2. Carefully pull the heating element down.
3. Clean the oven ceiling with a soft cloth with
warm water and a cleaning agent, and let it dry.
Install the heating element in the opposite
sequence.
Install the shelf supports.
WARNING! Make sure that the
heating element is correctly installed
and that it does not fall down.
REPLACING THE LAMP
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
15
Kommentare zu diesen Handbüchern