Zanussi ZGG67412XA Bedienungsanleitung

ENZGG67412User ManualHobGB

Serial number ...Important safety requirementsThis hob must be installed in accordance withthe Gas Safety (Installation and Us

CAUTION!It is important to install the elbowcorrectly, with the shoulder on theend of the thread, fitted to the hobconnecting pipe.CAUTION!Failure to

Before carrying out the connection, make sure:1. The limiter valve and the electrical systemcan take the appliance load (see the ratingplate)2. The su

ABA) supplied sealB) supplied bracketsCAUTION!Install the appliance only on aworktop with flat surface.Possibilities for insertionThe panel installed

Bypass diametersBURNER Ø BYPASS 1/100 mmRapid 42Semi-rapid 32Auxiliary 28Other technical dataTOTAL POWER:Gas original: G20 (2H) 20 mbar = 8 kWGas repl

Energy efficiencyProduct information according to EU 66/2014Model identification ZGG67412WA,ZGG67412XAType of hob Built-in hobNumber of gas burner

www.zanussi.com/shop867305761-A-472014

ContentsSafety information 2Safety instructions 3Product description 5Daily use 6Hints and tips 7Care and cleaning 7Troubleshooting 8Installation 9Tec

• Unattended cooking on a hob with fat or oil can be dangerousand may result in fire.• Never try to extinguish a fire with water, but switch off theap

• Before carrying out any operation make surethat the appliance is disconnected from thepower supply.• Make sure that the electrical information onthe

• Do not let cookware to boil dry.• Be careful not to let objects or cookware fallon the appliance. The surface can bedamaged.• Do not activate the co

Control knobSymbol Descriptionno gas supply / off positionmaximum gas supplySymbol Descriptionminimum gas supplyignitionDaily useWARNING!Refer to Safe

The spark generator can startautomatically when you switch onthe mains, after installation or apower cut. It is normal.Turning the burner offTo put th

Be very careful when youreplace the pan supports toprevent the hob top fromdamage.2. The enamel coating occasionally can haverough edges, so be carefu

Problem Possible cause RemedyThe flame extinguishes immedi-ately after ignition.Thermocouple is not heated upsufficiently.After lightning the flame, k