Zanussi ZGS688ITX Bedienungsanleitung PDF herunterladen (Seite 9)

Care and cleaning

Warning! Switch the appliance off and let it cool

down before you clean it. Disconnect the appliance

from the electrical supply, before carrying out any

cleaning or maintenance work.

Warning! For safety reasons, do not clean the

appliance with steam cleaners or high-pressure

cleaners.

Warning! Do not use abrasive cleaners, steel wool

pads or acids, they can cause damage to the

appliance.

• You can remove the pan supports to easily clean the

hob.

• To clean the enamelled parts, cap and crown, wash it

with warm soapy water.

• Stainless steel parts wash with water, and then dry with

a soft cloth.

• The pan supports are not dishwasher proof; they must

be washed by hand.

• When you wash the pan supports by hand, take care

when you dry them as the enamelling process occa-

sionally leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

• Make sure you position the pan supports correctly after

cleaning.

• To make burners work correctly, make sure that the

arms of the pan supports are in the centre of the burn-

er.

• Be very careful when you replace the pan supports to

prevent the hob top from damage.

After cleaning, dry the appliance with a soft cloth.

The stainless steel can become tarnished if it is too much

heated. Refer to this you must not cook with potstones,

earthenware pans or cast iron plates. Do not use alumini-

um foil to prevent damage the top during operation.

Removing the dirt:

1. – Remove immediately: melting plastic, plastic foil,

and food containing sugar.

– Stop the appliance and let it cool down before you

clean: limescale rings, water rings, fat stains, shi-

ny metallic discolorations. Use a special cleaner

applicable for surface of hob.

2. Clean the appliance with a damp cloth and some de-

tergent.

3. At the end rub the appliance dry with a clean cloth.

In order to properly place the pan supports, make sure

that the arms of the pan support are positioned in corre-

spondence with the hole placed at the base of the burner.

This way, the pan support will be stable and fixed.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle

with a metal electrode. Keep these components well clean

to prevent difficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the pres-

sure adjuster, if fitted.

What to do if…

Problem Possible cause Remedy

There is no spark when lighting the

gas

• There is no electrical supply • Make sure that the unit is connec-

ted and the electrical supply is

switched on.

• Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

• Burner cap and crown are placed

uneven

• Make sure that the burner cap and

crown are in correct positions.

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Zanussi ZGS688ITX Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Zanussi ZGS688ITX