Zanussi ZCM661NX Bedienungsanleitung Seite 22

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 28
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 21
22
Gas connection
Gas connection must be carried out according to
the rules in force. The manufacturing company
release the unit, once tested, adjusted for the kind of
gas stated on the rating plate located on the back of
the range, next to connection pipe. Be sure that you
are going to connect the unit to the same kind of gas
written on the plate.
Installation environnement
Warning - This unit can be installed and can work
only in constantly ventilated rooms, according to rules
in force.
In order to make the gas unit work properly, it is
necessary that air sufficient to gas combustion can
naturally flow in the room. (The installer must follow the
rules in force).
The air flow into the room must come directly
through openings of external walls. These openings (or
opening) should be realized in such a way not to be
Installation
This appliance cannot be positioned on
a base.
The following instructions are meant for a
qualified installer, in order that the operations of
installation, regulation, and service are executed
according to the existing regulations.
Whenever changes are mode involving the
disconnection of the appliance it is necessary to proceed
with maximum caution.
THE MANUFACTURING COMPANY
DECLINES ANY RESPONSABILITY FOR
POSSIBLE DAMAGES RESULTING
FROM AN INSTALLATION WHICH DOES
NOT COMPLY WITH THE RULES IN
FORCE.
Positioning
This appliance has been designed to be placed close
to furniture units not exceeding the height of the working
level. The distance between the hob and the side wall/fur-
niture (if present) should be minimum 450 mm.
Levelling
The appliance is provided with adjustable small
feet placed in the back and front corners od the base.
By adjusting the small feet it is possible to
change the height of the appliance so as to ensure a
better levelling with other surfaces and a uniform
distribution of the liquids contained in pans or pots
(see diagram).
occluded both from inside and outside.
Installation and maintenance must be carried out
by a qualified technician, in compliance with rules in
force.
The electric connection must be carried out in
compliance rules in force.
Our responsability will not be involved in case
of accidents caused by a defective or non existent
earth connection.
Combustion products discharge
Gas cooking units must discharge combustion
products through hoods directly connected to flues
or outside.
Connection using a rigid pipe or a flexible metal pipe
To ensure higher safety, it is recommended to
carry out the connection to the gas system using
rigid pipes (ex. copper) or using flexible stainless
Seitenansicht 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare