Zanussi ZEL63X Bedienungsanleitung Seite 14

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 48
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 13
3. Heat the hotplate to a low temperature and leave to
dry.
4. To maintain the hotplates, rub in a little sewing ma-
chine oil now and again and then polish off with ab-
sorbent paper.
Important! For stainless steel edges of the hob use cleaner
for stainless steel.
The stainless steel edge of the plate can be slightly
discoloured as a result of the thermal load.
What to do if…
Problem Possible cause and remedy
The appliance does not operate. Start the appliance again and set the heat setting in 10 seconds.
Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow time after time, speak to an authorised electrician.
The plate does not heat up. Make sure that you plug in the appliance and switch the electrical supply.
Make sure that you turn correct control knob.
Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow time after time, speak to an authorised electrician.
Results of plate are not satisfactory. Make sure that plate is clean and dry.
Make sure that the cooking pan is the correct size for the plate.
Make sure that cooking pan has a flat bottom.
Make sure that the setting is correct for type of cooking.
If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, speak your dealer or the local Service Force
Centre.
If you operated the appliance incorrectly, or the in-
stallation was not carried out by a registered engi-
neer, the visit from the customer service technician or
dealer may not take place free of charge, even during the
warranty period.
These data are necessary to help you quickly and cor-
rectly. These data are available on the identification plate
from the injectors kit.
Model description .................
Product number (PNC) .................
Serial Number (S.N.) .................
Use the original spare parts only. They are available at
Service Force Centre and authorized spare parts shops.
Technical data
Hob dimensions
Width: 580 mm
Height: 500 mm
Hob recess dimensions
Width: 550 mm
Height: 470 mm
Hot plate rating
Front left cooking zone
180 mm
2,0 kW
Front right cooking zone
145 mm
1,5 kW
Rear left cooking zone 145
mm
1,5 kW
Rear right cooking zone
180 mm
2,0 kW
14
Seitenansicht 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare